require "nvchad.mappings"
-- add yours here
local map = vim.keymap.set
map("n", ";", ":", { desc = "CMD enter command mode" })
-- map("i", "jk", "<ESC>")
-- map({ "n", "i", "v" }, "<C-s>", "<cmd> w <cr>")
local opts = { silent = true, noremap = true }
-- buffer cycling (normal mode)
map("n", "<C-n>", ":bnext<CR>", opts)
map("n", "<C-p>", ":bprev<CR>", opts)
-- Bdelete
-- :Bd close current tab
vim.api.nvim_create_user_command("Bd", "bdelete", {})
-- file explorer (NvChad uses nvim-tree)
map("n", "<C-t>", ":NvimTreeToggle<CR>", opts)
-- tagbar (or symbols-outline if you prefer)
map("n", "<F8>", ":TagbarToggle<CR>", opts)
-- folds (nvim-ufo)
-- zR open all folds (normal mode)
-- zM close all folds (normal mode)
map("n", "zR", function() require("ufo").openAllFolds() end, opts)
map("n", "zM", function() require("ufo").closeAllFolds() end, opts)
-- :Pe show the warning and error message
vim.api.nvim_create_user_command("Pe", function() vim.diagnostic.open_float() end, {})
-- :Copypath
vim.api.nvim_create_user_command("Copypath", function() vim.fn.setreg("+", vim.fn.expand("%:p")) end, {})
-- https://github.com/numToStr/Comment.nvim
-- normal mode
-- gcc Toggles the current line using linewise comment (normal)
-- gbc Toggles the current line using blockwise comment (normal)
-- `[count]gcc` - Toggles the number of line given as a prefix-count using linewise (normal)
-- `[count]gbc` - Toggles the number of line given as a prefix-count using blockwise (normal)
-- visual mode
-- `gc` - Toggles the region using linewise comment (visual)
-- `gb` - Toggles the region using blockwise comment (visual)
--
-- 代码折叠, 对应 nvim-ufo 插件, 地址: https://github.com/kevinhwang91/nvim-ufo
-- zR open all folds (normal mode)
-- zM close all folds (normal mode)
-- zo, zc z-open and z-close in current line
vim.o.fillchars = [[foldopen:,foldclose:]]
vim.o.foldcolumn = '1' -- '0' is not bad
vim.o.foldlevel = 99 -- Using ufo provider need a large value, feel free to decrease the value
vim.o.foldlevelstart = 99
vim.o.foldenable = true
-- Using ufo provider need remap `zR` and `zM`. If Neovim is 0.6.1, remap yourself
vim.keymap.set('n', 'zR', require('ufo').openAllFolds)
vim.keymap.set('n', 'zM', require('ufo').closeAllFolds)
require('ufo').setup({
provider_selector = function(bufnr, filetype, buftype)
return { 'treesitter', 'indent' }
end
})
return {
{
"stevearc/conform.nvim",
-- event = 'BufWritePre', -- uncomment for format on save
opts = require "configs.conform",
},
-- These are some examples, uncomment them if you want to see them work!
{
"neovim/nvim-lspconfig",
config = function()
require "configs.lspconfig"
end,
},
-- test new blink
-- { import = "nvchad.blink.lazyspec" },
-- {
-- "nvim-treesitter/nvim-treesitter",
-- opts = {
-- ensure_installed = {
-- "vim", "lua", "vimdoc",
-- "html", "css"
-- },
-- },
-- },
--
-- CMake helpers
{
"cdelledonne/vim-cmake",
cmd = { "CMakeGenerate", "CMakeBuild", "CMakeClean" },
},
-- better folds
{
"kevinhwang91/nvim-ufo",
event = "BufReadPost",
dependencies = "kevinhwang91/promise-async",
config = function()
require("ufo").setup {
provider_selector = function(_, ft, _) -- treesitter for most, fallback to indent
return { "treesitter", "indent" }
end,
}
end,
},
-- Markdown preview
{
"iamcco/markdown-preview.nvim",
ft = { "markdown" },
build = function() vim.fn["mkdp#util#install"]() end,
},
{
-- 关闭侧边栏却不改变比例, :Bdelete
'moll/vim-bbye',
},
{
"zbirenbaum/copilot.lua",
event = "InsertEnter",
config = function()
require("copilot").setup({})
end,
},
-- Codeium (formerly Windsurf) AI completions
{
"Exafunction/codeium.nvim",
cmd = { "Codeium" }, -- define the :Codeium commands
event = "InsertEnter", -- load on first insert
build = ":Codeium Auth", -- run once to kick off auth flow
dependencies = {
"nvim-lua/plenary.nvim",
"hrsh7th/nvim-cmp",
},
config = function()
require("codeium").setup({
-- any overrides, e.g.:
enable_cmp_source = true,
virtual_text = { enabled = false },
})
end,
},
{
"hrsh7th/nvim-cmp",
dependencies = {
"hrsh7th/cmp-path",
"hrsh7th/cmp-nvim-lua",
{
-- Make sure to run :Lazy load copilot-cmp followed by :Copilot auth once
"zbirenbaum/copilot-cmp",
config = function()
require("copilot_cmp").setup()
end,
},
},
opts = {
sources = {
{ name = "nvim_lsp", group_index = 2 },
{ name = "path", group_index = 2 },
{ name = "codeium", group_index = 2 },
{ name = "copilot", group_index = 2 },
{ name = "luasnip", group_index = 2 },
{ name = "buffer", group_index = 2 },
{ name = "nvim_lua", group_index = 2 },
},
},
},
-- {
-- "yetone/avante.nvim",
-- event = "VeryLazy",
-- lazy = false,
-- version = false, -- set this if you want to always pull the latest change
-- opts = {
-- provider = "deepseek",
-- vendors = {
-- deepseek = {
-- __inherited_from = "openai",
-- endpoint = "https://api.deepseek.com/v1",
-- model = "deepseek-coder",
-- },
-- },
-- },
-- -- if you want to build from source then do `make BUILD_FROM_SOURCE=true`
-- build = "make",
-- -- build = "powershell -ExecutionPolicy Bypass -File Build.ps1 -BuildFromSource false" -- for windows
-- dependencies = {
-- "nvim-treesitter/nvim-treesitter",
-- "stevearc/dressing.nvim",
-- "nvim-lua/plenary.nvim",
-- "MunifTanjim/nui.nvim",
-- --- The below dependencies are optional,
-- "nvim-tree/nvim-web-devicons", -- or echasnovski/mini.icons
-- "zbirenbaum/copilot.lua", -- for providers='copilot'
-- {
-- -- support for image pasting
-- "HakonHarnes/img-clip.nvim",
-- event = "VeryLazy",
-- opts = {
-- -- recommended settings
-- default = {
-- embed_image_as_base64 = false,
-- prompt_for_file_name = false,
-- drag_and_drop = {
-- insert_mode = true,
-- },
-- -- required for Windows users
-- use_absolute_path = true,
-- },
-- },
-- },
-- {
-- -- Make sure to set this up properly if you have lazy=true
-- 'MeanderingProgrammer/render-markdown.nvim',
-- opts = {
-- file_types = { "markdown", "Avante" },
-- },
-- ft = { "markdown", "Avante" },
-- },
-- },
-- },
{
"nvim-lualine/lualine.nvim",
lazy=false,
dependencies = {},
config = function()
require("lualine").setup {
options = {
theme = "jellybeans",
},
sections = {
lualine_a = { "mode" },
lualine_b = { "branch", "diff" },
lualine_c = {
{
function()
return vim.fn.expand("%:p")
end,
icon = "",
padding = { left = 1, right = 1 }
}
},
lualine_x = { "encoding", "filetype" },
lualine_y = { "progress" },
lualine_z = { "location" },
},
}
end,
},
{
"echasnovski/mini.sessions",
lazy = false, -- 建议设为 false，使其尽早加载
config = function()
require("mini.sessions").setup({
-- 你可以在这里添加更多配置
-- 例如，自动保存和自动恢复会话
autoread = true, -- 启动时自动恢复上次的会话
autowrite = true, -- 退出时自动保存会话
})
end,
},
}
